Page 10 - Pronto-Panel-Low-Rise-Intertenancy-Technical-Manual-Final
P. 10
PRONTO PANEL
COMPLIANCE
Regulations for Intertenancy Walls
Separation between sole occupancy units for Class 1 construction
require the wall to achieve an FRL of 60/60/60, and to achieve acoustic
performance at or exceeding Rw+Ctr 50.
The Pronto Panel Low Rise Intertenancy Wall System has achieved all
relevant fire and acoustic performance requirement as outlined below.
Fire Acoustic
FRL 60/60/60 Rw+Ctr 50
The Pronto Low-Rise Intertenancy Wall system achieves The Pronto Low-Rise Intertenancy Wall has been laboratory
an FRL of 60/60/60 as tested by Exova Warringtonfire to tested by Day Design acoustics (5518 - 1B Rev D) and
AS1530.4 (reports 50911900.3 and 51504400.2A). These variations to the tested systems have been assessed by
reports state that the wall system achieves an FRL of PKA (report PKA105BKW). All systems in this manual
60/60/60 up to a maximum height of 8 meters. have been deemed to meet and in most cases exceed, the
minimum acoustic requirement of Rw+Ctr 50 for this type
Non-Combustible of construction.
Pronto Panel has been tested by CSIRO against AS 1530.1
and deemed non-combustible (report FNC 11644). Discontinuous Construction
Aluminium brackets provided by Brickworks secure the
8m Maximum Height Pronto Panel to the frame at the top and base of each panel,
The Pronto Low-Rise Intertenancy Wall has been designed ensuring the wall is discontinuous construction.
and tested to achieve the requirements of the NCC for
construction up to a maximum height of 8 metres from the Cavity
base of the wall. The Pronto Low-Rise Intertenancy Wall System cavity
can be as low as 10mm on each side of the Panel without
compromising discontinuous construction.
Disclaimer:
Brickworks takes no responsibility for any Pronto Panel that is not installed in accordance with this manual.
/ 10 /